Members – GaonGame

Members

Viewing 1 - 20 of 47 active members

$Profile picture of Three-return dryer is an improved high-efficiency energy-saving product based on single-cylinder rotary dryer.Through application in many enterprises and industries, good results have been achieved.The rotary three-reflux dryer improves the internal structure of the original single-cylinder dryer, increases the pre-drying of the wet material before entering the dryer and prolongs the drying time of the wet material in the dryer, plus sealing, moisture preservation and reasonable supporting measures, so that the production capacity of the dryer is increased by 50-80% compared with the original single-cylinder dryer, the evaporation intensity per unit volume can reach 120-180kg/m3, and the standard coal consumption is only 6-8 kg/t.Its technology is advanced, its operating parameters are reasonable, and its operation is simple and feasible. Working Principle The material enters the inner layer of the rotary drum from the feeding device to realize downstream drying. The material is continuously picked up and scattered under the papermaking plate of the inner layer to realize heat exchange in a spiral traveling mode. The material moves to the other end of the inner layer to enter the middle layer for countercurrent drying. The material is continuously and repeatedly lifted in the middle layer to realize a traveling mode of advancing in two steps and retreating in one step. The material in the middle layer not only fully absorbs the heat emitted by the inner layer drum, but also absorbs the heat of the middle layer drum, and at the same time prolongs the drying time. The material reaches the optimal drying state here.The material travels to the other end of the middle layer and falls into the outer layer. The material travels in a rectangular multi-loop manner in the outer layer drum. The material reaching the drying effect travels rapidly and exits the drum under the action of hot air. The wet material failing to reach the drying effect cannot travel rapidly due to its own weight. The material is fully dried in the rectangular papermaking plate, thus completing the drying purpose. Main Features 1. The investment is small, and the investment required for equipment is 1/6 of that of imported products. 2. The final moisture rate is low, and the final moisture content of the materials is guaranteed below 0.5%. It is the preferred product for dry mixed mortar and slag powder production line. 3. The thermal efficiency is high, and the thermal efficiency of the cylinder self-insulation is as high as over 70% (the thermal efficiency of the traditional single-cylinder dryer is only 35%), thus improving the thermal efficiency by 35%. 4, fuel is extensive, fuel can adapt to coal, oil and gas.Can bake blocks, pellets and powder materials under 20 mm. 5. Low investment in civil engineering and power consumption.Compared with a single-cylinder dryer, the utility model has the advantages that the occupied area is reduced by about 50%, the civil engineering investment is reduced by about 50%, and the power consumption is reduced by 60%. 6. The required final moisture index can be easily adjusted and controlled according to the user\'s requirements. 7. Low outlet temperature and long service time of dust removal equipment. 8. There is no need for large and small gears to drive, and the supporting wheels are used to drive. 9. The discharging temperature is lower than 60%, and packaging can be continuously produced. Simply put, the three-cylinder dryer has the advantages of compact structure, simple structure and reasonable layout, improves the heat exchange rate of materials and heat energy, and ensures good drying effect of materials;The basic investment is less, which is only half of that of the single drum dryer with the same output, thus reducing the one-time investment.Reliable operation, low energy consumption and high thermal efficiency;At the same time, it is easy to realize automatic control, reduce operators and save labor resources. Application Scope The three-cylinder dryer is mainly used for drying granular materials within a certain humidity and particle size range.Such as yellow sand, molding sand, slag, coal cinder, small-particle clay, and other small-particle materials that are not afraid of high temperature and dust pollution.The moisture content of the dried material can reach below 1-0.5%.This machine is widely used in dry-mixed mortar, yellow sand, slag from cement plants, clay, coal, mixture, iron powder, building materials, chemical industry, casting and other industries, providing raw materials.Dryer suppliers website:http://www.orecofactory.com/dryer/$
Three-return dryer is an improved high-efficiency energy-saving product based on single-cylinder rotary dryer.Through application in many enterprises and industries, good results have been achieved.The rotary three-reflux dryer improves the internal structure of the original single-cylinder dryer, increases the pre-drying of the wet material before entering the dryer and prolongs the drying time of the wet material in the dryer, plus sealing, moisture preservation and reasonable supporting measures, so that the production capacity of the dryer is increased by 50-80% compared with the original single-cylinder dryer, the evaporation intensity per unit volume can reach 120-180kg/m3, and the standard coal consumption is only 6-8 kg/t.Its technology is advanced, its operating parameters are reasonable, and its operation is simple and feasible. Working Principle The material enters the inner layer of the rotary drum from the feeding device to realize downstream drying. The material is continuously picked up and scattered under the papermaking plate of the inner layer to realize heat exchange in a spiral traveling mode. The material moves to the other end of the inner layer to enter the middle layer for countercurrent drying. The material is continuously and repeatedly lifted in the middle layer to realize a traveling mode of advancing in two steps and retreating in one step. The material in the middle layer not only fully absorbs the heat emitted by the inner layer drum, but also absorbs the heat of the middle layer drum, and at the same time prolongs the drying time. The material reaches the optimal drying state here.The material travels to the other end of the middle layer and falls into the outer layer. The material travels in a rectangular multi-loop manner in the outer layer drum. The material reaching the drying effect travels rapidly and exits the drum under the action of hot air. The wet material failing to reach the drying effect cannot travel rapidly due to its own weight. The material is fully dried in the rectangular papermaking plate, thus completing the drying purpose. Main Features 1. The investment is small, and the investment required for equipment is 1/6 of that of imported products. 2. The final moisture rate is low, and the final moisture content of the materials is guaranteed below 0.5%. It is the preferred product for dry mixed mortar and slag powder production line. 3. The thermal efficiency is high, and the thermal efficiency of the cylinder self-insulation is as high as over 70% (the thermal efficiency of the traditional single-cylinder dryer is only 35%), thus improving the thermal efficiency by 35%. 4, fuel is extensive, fuel can adapt to coal, oil and gas.Can bake blocks, pellets and powder materials under 20 mm. 5. Low investment in civil engineering and power consumption.Compared with a single-cylinder dryer, the utility model has the advantages that the occupied area is reduced by about 50%, the civil engineering investment is reduced by about 50%, and the power consumption is reduced by 60%. 6. The required final moisture index can be easily adjusted and controlled according to the user's requirements. 7. Low outlet temperature and long service time of dust removal equipment. 8. There is no need for large and small gears to drive, and the supporting wheels are used to drive. 9. The discharging temperature is lower than 60%, and packaging can be continuously produced. Simply put, the three-cylinder dryer has the advantages of compact structure, simple structure and reasonable layout, improves the heat exchange rate of materials and heat energy, and ensures good drying effect of materials;The basic investment is less, which is only half of that of the single drum dryer with the same output, thus reducing the one-time investment.Reliable operation, low energy consumption and high thermal efficiency;At the same time, it is easy to realize automatic control, reduce operators and save labor resources. Application Scope The three-cylinder dryer is mainly used for drying granular materials within a certain humidity and particle size range.Such as yellow sand, molding sand, slag, coal cinder, small-particle clay, and other small-particle materials that are not afraid of high temperature and dust pollution.The moisture content of the dried material can reach below 1-0.5%.This machine is widely used in dry-mixed mortar, yellow sand, slag from cement plants, clay, coal, mixture, iron powder, building materials, chemical industry, casting and other industries, providing raw materials.Dryer suppliers website:http://www.orecofactory.com/dryer/
active 7 months, 1 week ago
Tub Faucet Polished Chrome/Roman Tub Bathroom Faucet/Polished Brass Widespread Bathroom Faucet If you are in love to do DIY project, you must be grateful with our product銆俆his tub is easy to instal and useful锛孌esigner combining classical and modern design Let users feel the crossing of the times more銆?br/> Luxury, never being an end in itself, but always serving an aesthetic purpose: that is the philosophical attitude of Fontainelife which shows its structural eclecticism, wisely combining classicism and contemporary in an irresistible charming mix.鈥?These products are created to satisfy who lives in refined locations and for those who loves the exclusive atmosphere and live in the most desirable areas.鈥?nbsp; Unique faucet lines of prestige with three hole, dedicated to clients who demands news about luxury and design creations.鈥?It was designed not only to furnish spaces, but to convey the concept of exclusivity where the top is a must.鈥?/p> FAQ How is your production capability? Fontainalife Inc is a trading company with more than 20 years鈥?experience in the plumbing industry and we have connection with suppliers with full production capability for casting, machining, forging, stamping and water jets production. What is your production lead time? Production lead time will differ by products. Usually, the machined parts will be around 15-20 days, forging parts 45 days, and casting items 50-60days after confirming order. Does your company do ODM service for customized products? The staffs in our R&D department are well experienced in the plumbing industry, with more than 20 years experience. We have cooperated with our customers in developing new products every years and if you need customized products, please kindly contact us Can your factory produce the low-lead faucet? Our faucets have been made according to CUPC requirement and the lavatory spouts are all with the lead < 0.25%. We also can produce the faucet according to your requirement of lead content. What is the minimum order quantity? The MOQ will differ by products and marked in every products listed.Faucet Spout price website:http://www.fontainelife.net/faucet-parts/faucet-spout/
active 7 months, 3 weeks ago
Aluminum titanate spray granulation dryer WUXI ATZ EQUIPMENT CO., LTD was founded in 2002. We focus on manufacturing high end spray dryer for practical formation and related facilities. We are among the eminent names in the industry for manufacturing and supplying Spray Dryers for our clients. The offered spray dryers are made in tune with the variegated requirements of the clients. They are energy competent, easy to clean and user friendly. Specifications Max. Evaporation Capacity50Kg/h Max. Atomizer Speed2000- 16000rpm Atomizing Disk Dia.148mm Drying Tower Dia.4600mm Atomizer Motor Power1.5KW Solid Content鈮?5% Residual Moisture Content鈮?.3% Entry Temperature200-250鈩?/p> Exit Temperature90-110鈩?/p> Wildely used Spray granulation dryer manufacture by ATZ ( An ISO-9001 certified factory) suitable for the following Products: Ceramics and Similar Materials: Aluminum titanate; Aluminum Oxide; Silicate; Barium Titanate; Beryllia; Zirconate Titanate ; Magnesia; Magnesium Titanate; various metal oxides; Titanium Oxide; Zinc Oxide; Zirconium and many more... Why choose us? Extensive production experience: We are specialized in spray dryer and other accessory equipment with an experience of 17 years. Safe packing: All machines are wrapped in plastic film before shipping. Finally be packed with seaworthy package or in wooden case. Best after-sale service: There will be a professional after-sales staff to solve the possible problems of the machine for you, and all products are trusted by domestic and foreign customers.Centrifugal Spray Granulation Dryer factory website:http://www.atzspraydryer.com/spray-dryer/centrifugal-spray-granulation-dryer/
active 7 months, 3 weeks ago
$Profile picture of Our History Located in Xiamen, Fujian Province. We specilized in producing mother and baby products more then 10years. Quality is our culture,We are sure that our high quality products and excellent services will attract more and more customers\' appreciation. Our Factory There are more than one hundred employees in our company. We made the baby carrier ,diaper bag with the most eco-friendly and the most innovative materials. Our Product Diaper bag ,baby carrier, changing mat and other baby accessories ect. Product Application Baby carrier for 0-3 years baby ,diaper bag for and Mom and Dad. Our Certificate Our factory are well managed to reach ISO9001 standards .Also we applied social audit such as BSCI, SEDEX, SGS. For our products, we have passed the certification of EN-71,CE ect. Production Equipment Cutting Machine,Flat Sewing Machine ,High Head Sewing Machine,Pattern Sewing Machine ect. Production Market Our products have good reputation in Europe, America ,UK, Canada and etc. Our Service OEM &ODM are welcomed，Quality-Oriented,Customer -Orientedbest toddler carrier suppliers website:http://www.ababyproduct.com/$
Our History Located in Xiamen, Fujian Province. We specilized in producing mother and baby products more then 10years. Quality is our culture,We are sure that our high quality products and excellent services will attract more and more customers' appreciation. Our Factory There are more than one hundred employees in our company. We made the baby carrier ,diaper bag with the most eco-friendly and the most innovative materials. Our Product Diaper bag ,baby carrier, changing mat and other baby accessories ect. Product Application Baby carrier for 0-3 years baby ,diaper bag for and Mom and Dad. Our Certificate Our factory are well managed to reach ISO9001 standards .Also we applied social audit such as BSCI, SEDEX, SGS. For our products, we have passed the certification of EN-71,CE ect. Production Equipment Cutting Machine,Flat Sewing Machine ,High Head Sewing Machine,Pattern Sewing Machine ect. Production Market Our products have good reputation in Europe, America ,UK, Canada and etc. Our Service OEM &ODM are welcomed，Quality-Oriented,Customer -Orientedbest toddler carrier suppliers website:http://www.ababyproduct.com/
active 8 months, 1 week ago
$Profile picture of Guangzhou Chemxin Environmental Material Co.,Ltd is a subsidiary of Jiangxi Xintao Technology Co., Ltd. And we are located in Panyu District, Guangzhou city, Guangdong province, China. Our factory, XINTAO was established in 2002, which was restructured from a few of existing companies. And it is located in Pingxiang City, Jiangxi Province, P.R. China. besides, it is the fourth officially listed \"Three New Board\" enterprise in Pingxiang . In addition, our main products are molecular sieve, activated alumina, ceramic ball, ceramic, plastic & metal random and structured packing, etc, which were sold to more than 80 regions in the world. And our annual capacity is also very big, like 12,000 ton for molecular sieves, 10,000 ton for inert ceramic balls, 10,000 ton for activated alumina, 30,000 M3 for varieties types for chemical packings and 10,000 m3 for honeycomb ceramics etc. With this huge capacity, we made our products export to over 80 countries and areas with good feedback. For better development and intensive management, Chemxin has certified by ISO 9001:2008, ISO14001:2004 and OHSAS18001:2008. CHEMXIN not only promotes products, but also emphasizes on providing professional technique and good service. Customer’s satisfaction and prompt delivery are the two points that never changed. Good reputation is our strong backbone. Because of this, we do our best to maintain the two ground rules for years. On the other hand, we sincerely hope we can have a long-term cooperative relationship with mutual benefits. Moreover, CHEMXIN is a responsible and committed team who will meet your requirements promptly and fully. Please contact us at anytime for your requirements and warm welcome your visit to our factory. Achievement 1. \"Three New Board\" enterprise-Public company 2.Ten patents for utility models of random packing 3. Factory device: Zeolite Automatic Molding Equipment, Activated Alumina Production Line Equipment, Ceramic Random Packing, Metal Random Packing, and Plastic Random Packing Automatic Molding Equipment, Catalyst Latest dedicated Equipment. Basic idea From a long time, CHEMXIN was determined to set standards for itself. We are not only providing professional products for customers, but also good service. We always believe, professional knowledge and innovation which are based on professional knowledge, and fulfilling its responsibilities towards its customers, employees, the environment, which are the factors we must bear in mind. Production policy At CHEMXIN, we have our own manufacturing facilities, which have been developed and maintained to high technical specifications. Our products all resort to standard from purchasing raw material, manufacturing. We ensure all of our products quality and safety. 3-5mm 5A molecular sieve sphere brands website:http://www.chemxin-en.com/$
Guangzhou Chemxin Environmental Material Co.,Ltd is a subsidiary of Jiangxi Xintao Technology Co., Ltd. And we are located in Panyu District, Guangzhou city, Guangdong province, China. Our factory, XINTAO was established in 2002, which was restructured from a few of existing companies. And it is located in Pingxiang City, Jiangxi Province, P.R. China. besides, it is the fourth officially listed "Three New Board" enterprise in Pingxiang . In addition, our main products are molecular sieve, activated alumina, ceramic ball, ceramic, plastic & metal random and structured packing, etc, which were sold to more than 80 regions in the world. And our annual capacity is also very big, like 12,000 ton for molecular sieves, 10,000 ton for inert ceramic balls, 10,000 ton for activated alumina, 30,000 M3 for varieties types for chemical packings and 10,000 m3 for honeycomb ceramics etc. With this huge capacity, we made our products export to over 80 countries and areas with good feedback. For better development and intensive management, Chemxin has certified by ISO 9001:2008, ISO14001:2004 and OHSAS18001:2008. CHEMXIN not only promotes products, but also emphasizes on providing professional technique and good service. Customer’s satisfaction and prompt delivery are the two points that never changed. Good reputation is our strong backbone. Because of this, we do our best to maintain the two ground rules for years. On the other hand, we sincerely hope we can have a long-term cooperative relationship with mutual benefits. Moreover, CHEMXIN is a responsible and committed team who will meet your requirements promptly and fully. Please contact us at anytime for your requirements and warm welcome your visit to our factory. Achievement 1. "Three New Board" enterprise-Public company 2.Ten patents for utility models of random packing 3. Factory device: Zeolite Automatic Molding Equipment, Activated Alumina Production Line Equipment, Ceramic Random Packing, Metal Random Packing, and Plastic Random Packing Automatic Molding Equipment, Catalyst Latest dedicated Equipment. Basic idea From a long time, CHEMXIN was determined to set standards for itself. We are not only providing professional products for customers, but also good service. We always believe, professional knowledge and innovation which are based on professional knowledge, and fulfilling its responsibilities towards its customers, employees, the environment, which are the factors we must bear in mind. Production policy At CHEMXIN, we have our own manufacturing facilities, which have been developed and maintained to high technical specifications. Our products all resort to standard from purchasing raw material, manufacturing. We ensure all of our products quality and safety. 3-5mm 5A molecular sieve sphere brands website:http://www.chemxin-en.com/
active 9 months, 2 weeks ago
ABOUT US VOLIBEL is a high-tech group company major in developing, producing and selling products with automatically identifying function and supply system. We have Office and our Factory in China shenzhen.We have professional product development teams and modern factory. And We have partners and agents in usa , canada, europe, africa, asia,brazil We look forward to working with you to provide you with more comprehensive and better products. Of course, Welcome OEM/ODM! Our Factory During our more than many years business, we cooperated many famous brand customers,Alibaba Cloud Computing,NXP Semiconductors,ARM,Advanced RISC Machines,Atmel, etc.Our customers are satisfied with our excellent R&D production capacity, carefully researching,developing product quality and actively listening to the need of customers.Covering鈥俛n鈥倃orkshop area鈥俹f鈥?,000-3,000 square meters. Capacity each month is 18,000 smart locks with turnover around US$1 Million - US$2.5 Million yearly. Our certificate Verified by various professional platforms FCC, CE, RoHS. Professional and reliable. Intelligent Lock Service One-stop Industrial ChainWe have full-line production and processing equipment testing capabilities for smart locks. Including: mold design, mold manufacturing, zinc alloy die-casting, aluminum alloy die-casting, injection molding and other ten workshop departments. vilibel has first-class modern production technology and capabilities to meet the needs of various large-scale production. Production Market VOLIBEL is a multinational company focused on smart products. Its subsidiaries are located in the United States, the United Kingdom, Hong Kong and China. Its has a strong marketing network in more than 90 countries and regions around the world. Our Service Our鈥倃ell-equipped鈥俧acilities鈥俛nd鈥俥xcellent鈥俼uality鈥俢ontrol鈥倀hroughout鈥俛ll鈥俿tages鈥俹f鈥俻roduction鈥俥nables鈥倁s鈥倀o鈥俫uarantee鈥倀otal鈥俢ustomer鈥俿atisfaction. The most important service we insist is 100% guarantee, 100% satisfaction or return or reproduction, 100% MONEY BACK GUARANTEE, 0% risk for brand clients.Wholesale Cabinet Smart Padlock website:http://www.volibel.com/ website2:http://www.volibelonline.com/
active 9 months, 3 weeks ago
frtte111 - "ABIS was founded in Shenzhen China,in 1996,adjacent to Hong Kong,has its own factory of 12,000 square meters. With the advanced facilities from Germany, Swiss and Japan, and a highly experienced design and […]"View
active 9 months, 3 weeks ago
วี้.วิช วีที
active 2 years, 9 months ago
Kenneth Larsson
active 2 years, 11 months ago
Kristi Monroe
active 3 years, 1 month ago
Jia Xuan Thong
active 3 years, 2 months ago
Rhoda Ballantyne
active 3 years, 3 months ago
GaonGame
active 3 years, 3 months ago
Jessica Borgonovi
active 3 years, 11 months ago
Gloria Williams
active 4 years ago
William Duvall
active 4 years, 1 month ago
Jaime Diaz
active 4 years, 1 month ago
حسن عبدزره صباح
active 4 years, 2 months ago
Mayank Singh
active 4 years, 3 months ago
Youmadbro Carl Stinchcombe
active 4 years, 3 months ago

Viewing 1 - 20 of 47 active members

Terms Privacy Contact Mobile